MZKT-7930 Astrolog 1/72

A truck that is currently in use as a platform for multiple combat systems. Model represents the vehicle in the test phase. The basis for the conversion is Zvezda Iskander-M while the cargohold was built from scratch. Zvezda model is very good, the level of detail is very high, and the fitting is almost perfect.

 

 

 

Read more: MZKT-7930 Astrolog 1/72

Spitfire Mk.Vb, Tamiya 1/48

Well-known scale model of the legendary Spitfire Mk.Vb from Tamiya represents their usually high quality product : excellent fit coupled with small number of parts with nice details. Assembly of this model is a real pleasure .PE cockpit instrument panel,and seat belts were added, also I did complete riveting

The kit was upgraded with Master set of brass cannons and Eduard Brassin bomb set .


Read more: Spitfire Mk.Vb, Tamiya 1/48

Ilyushin Il-2 Sturmovik

The Ilyushin Il-2 Sturmovik was a ground-attack aircraft produced by the Soviet Union in large numbers during the Second World War. With 36,183 units of the Il-2 produced during the war, and in combination with its successor, the Ilyushin Il-10, a total of 42,330 were built, making it the single most produced military aircraft design in aviation history, as well as one of the most produced piloted aircraft in history along with the American postwar civilian Cessna 172 and the Soviet Union's own then-contemporary Polikarpov Po-2 Kukuruznik multipurpose biplane.

Modeler: Dragan Zdravković - Gaša

 

Read more: Ilyushin Il-2 Sturmovik

LKW 4500A and flak 3.7cm

 Vehicle represents field modification from last days od war on western front.The wooden beams are made of balsa. Manufacturer: vehicle Zvezda, flak Tamiya 1/35

Modeler: Dragan Zdravković - Gaša

 

 

 

 

 

Read more: LKW 4500A and flak 3.7cm

Brewster Buffalo Mk I

Brewster Buffalo is first Tamiya's 1/48 scale kit dating back in 1974, old but still pretty good. Overall fit is good so only minor filling was necessary. Cockpit interior is far below todays standards so lots of scratch building was involved in cockpit area. Entire external surfaces was riveted and some missing panel lines was rescribed. Fabric texture was reproduced on all control surfaces using this technique.


 

Read more: Brewster Buffalo Mk I

Jak UT-2 , 1/48 Aeropoxy

   This is the first kit of Jak UT-2 in 1/48 scale . It is produced by Aeropoxy.Regarding fact that this is resin kit overall fit is quite good, some filling is necessary where fuselage meets wings . One of greatest challanges was to make wind shields.Some more scratch building is necessary to upgrade engine, landing gear and interior. Decals are laser printed on clear decal film and fuselage number was airbrushed with help of template. Kit was painted with custom mix of Gunze colors to represent aircraft of Yugoslav airforce flying school during 1950s .

 

Read more: Jak UT-2 , 1/48 Aeropoxy

Lavochkin La-7 1/72

  The Lavochkin La-7 (Russian: Лавочкин Ла-7) was a piston-engined Soviet fighter developed during World War II by the Lavochkin Design Bureau (OKB). It was a development and refinement of the Lavochkin La-5, and the last in a family of aircraft that had begun with the LaGG-1 in 1938. Its first flight was in early 1944 and it entered service with the Soviet Air Forces later in the year. A small batch of La-7s was given to the Czechoslovak Air Force the following year, but it was otherwise not exported. Armed with two or three 20 mm (0.79 in) cannon, it had a top speed of 661 kilometers per hour (411 mph).

 

Read more: Lavochkin La-7 1/72

I-16 Luftsieg 1/48

   Signal : " Young Luftwaffe lieutenant enjoys moment of glory examining his recent areal victory in the opening days of Operation Barbarosa " Dio is in 1/48 scale, Polikarpov I-16 from Eduard , CV-11 made by Tamiya , figures are from excellent ICM LW set and grass is made by Polakmodels.

 

 

 

 

 

 

Read more: I-16 Luftsieg 1/48

Mi-24 Hobby Boss 1/72

The Mil Mi-24 (Russian: Миль Ми-24; NATO reporting name: Hind) is a large helicopter gunship, attack helicopter and low-capacity troop transport with room for eight passengers.It is produced by Mil Moscow Helicopter Plant and has been operated since 1972 by the Soviet Air Force and its successors, along with more than 30 other nations.

 

 

Read more: Mi-24 Hobby Boss 1/72

P-39Q-5 Eduard 1/48

  P-39Q-5, Poland, autumn 1944 Captain Aleksandar Pavlovic Filato achieved 21 individual and 4 joint victory. Downed 20 April 1945, hit by German flak. Model EDUARD 1/48, decals AML decals.ITALERI Acrylic Paints: Olive drab, green medium gray interior, as a basis.

 

 

 

Read more: P-39Q-5 Eduard 1/48

ISU-122 Zvezda 1/35

A  ISU-122 heavy self-propelled gun was built at the Chelyabinsk Kirov Plant, in December 1943. The design shared the chassis of the ISU-152 self-propelled gun and differed only in armament, having an A-19S 121.92-mm gun as its main weapon instead of the ISU-152's ML-20S gun-howitzer.


 

 

 

Read more: ISU-122 Zvezda 1/35

Operation Belgrade 1/35

6    After a few days of bitter street fighting Belgrade is liberated, Yugoslav partisan and Soviet tanker relaxes sharing a plum brandy.
1/35 scale Bren carrier is Tamiya kit , old but still pretty good. It bears markings of 4-th Guards motorized brigade , greyhound amblem mask is reconstructed from a war correspondent movie ' Operacija Beograd '. DshK machine gun is Zvezda kit. Partisan figure is converted Tamiya figure, I'v used Miliput to make pocket onto trousers and they become British one. Soviet tanker kit is a some unknown resin kit, I'v replaced its head and hands.

 

Read more: Operation Belgrade 1/35